Which is better, covering door or film pressing door?

   Cladding doors and membrane pressure doors are both a type of door panel, but do you understand the difference between the two? What are their advantages and disadvantages? Consumers are faced with a variety of door panels when buying, how should we choose? This article will introduce to you today the difference between clad door panels and film pressure door panels, so that everyone has a better understanding of which is better for solid wood clad doors and film pressure doors.

The difference between clad door panel and film pressure door panel

1. Both are some MDF materials, but the manufacturing process of the two is different. If it is a cladding door panel, it is processed through a 360-degree cladding process. If it is a film press door panel, it is polished, then covered with a PVC film on the surface, and then formed by a film press.


2. The thickness is also different. Comparing the two, you will find that the thickness of the film-pressed door panel is slightly thicker than the thickness of the cladding door panel, mainly because of the difference in the film.


3. The edge banding is also different. If you choose a coated door panel, there is edge banding, but the film pressure door panel does not have edge banding, so you will find that the latter is single-sided, but the coated door panel is 360 degrees , Fully wrapped, and thicker, more classic and durable.



Advantages and disadvantages of clad door panels

The clad door panel is a kind of paint-free board, so it is not easy to crack, and it is very decorative. It has a relatively clear hierarchy and is not prone to deformation problems, but it has a shortcoming that is very afraid of collisions and bumps. Once damaged, its maintenance costs are still relatively high.

The advantages and disadvantages of membrane pressure door panels

1. The advantage is that the appearance is better, and there is no need to worry about impact, because it is more wear-resistant and scratch-resistant, and another feature is high temperature resistance, environmental protection performance is more prominent, and flame retardant properties, which are sold in the market. There are also many door panel colors and patterns for consumers to choose.

2. The disadvantage is that it is easy to dent in different directions after cooling.


Through the above introduction of the differences and advantages and disadvantages of solid wood cladding doors and blister doors, I believe that everyone has their own understanding of which is good for solid wood cladding doors and blister doors. You can choose according to actual needs when purchasing. To choose.


（The article is from the Internet and does not represent the views of this website.）

(Click on the link below to know more↓↓↓)
thermolaminated kitchen doors
polyurethane kitchen cabinet colours
thermoforming carbon fiber
2pac kitchen colours
profile doors for kitchen